您現在位在:客戶服務首頁> 線上客服> 專線備援

備援對象:限HiNet專線用戶,您需具備ISDN電路及HiNet ISDN 撥接帳號。在您填
     妥備援申請表後回傳給HiNet機房我們將盡快完成備援設定。

設定費用:專線備援設定費目前免收。( 同理,若欲取消備援請傳真備援申請表並
     註明取消備援即可 )。

備援後之IP:備援專線之LanIP。

申請方式:請填寫「ISDN專線備援申請表」,填寫後傳真至:02-23563983 或 02-       23442513 HiNet機房,我們將儘速為您處理
>>ISDN 專線備援申請表

路由器設定範例
( 以Cisco 2503 Router為例,僅列ISDN設定部分 )

Version 11.2 ----------請使用 11.2(含)以上之版本

!

isdn switch-type basic-net3

!

interface Ethernet 0

ip address 210 .61 .221 . 30   255 . 255 . 255 . 224
---------- ( HiNet用戶端所配發LAN Port IP Gateway )

!

interface Serial 0backup delay 10 10
----------專線斷10 sec 後,開始撥ISDN。專線up 10 sec後切斷ISDN

backup interface BRIO

ip address 210 . 69 . 10 . 245   255 . 255 . 255 . 252

encapsulation ppp

!

interface BRIO

description ISDN backup

ip unnumbered Ethernet 0

encapsulation ppp

dialer idle-timeout 300
----------idle 300 sec 後切斷

dialer enable-timeort 1

dialer string 81731341
----------HiNet機房台北區域撥接代表號 ( 請依您所在區域填寫HiNet當地特別門號 )

dialer load-threshold 100 either
----------流量控制,請洽routing廠商

dialer-group 1

no fair-queue

ppp pap sent-username Username passeord 7 0125B
----------( PAP 認證之username及 password )

ppp multilink

!

ip classless

ip route 0 . 0 . 0 . 0    0 . 0 . 0 . 0 Serial 0

ip route 0 . 0 . 0 . 0    0 . 0 . 0 . 0 BRIO 100

dialer-list 1 protocol ip permit

!

▲Top